New Home Inspection

Protect your investment every step of the way with a New Build Home Inspection (Phase Home Inspection) from SEI Home Inspections.

Inspection of the foundation form itself. Proper support and securing of the foundation form boards and braces.
We check to make sure the foundation form boards are square or make sure the corners of the foundation are at least close to 90 degrees (square).
We check the foundation beam and pad depth.
Inspect for cave ins at the beams.
Inspection for soft pads after a rain
We inspect to make sure post tension anchor plates are secured to the foundation form boards.
Inspect to make sure the anchor plates are properly spaced from each other.
Inspect for snug installation of post tension anchor cable catheads.
Inspectors check for proper placement and installation of the post tension cables in the foundation form.
Inspect to make sure the post tension anchor cables themselves are properly protected.
Inspect to make sure vapor barrier laid over the beam and pads of the foundation is uniform and without damage.
Inspector will inspect for the proper location, size and installation of rebar in the foundation form of the home.
Check to ensure any floating form material is secured.
Inspect to make sure the sewer pipes have been properly protected by mastic.
Inspect for damaged sewer pipes where they cross foundation beams.
Thorough inspection to ensure no post tension cables are touching the sewer pipes.
Inspect for water in the foundation beams after a rain.
And more foundation inspection points but this will vary by builder technique and material.

Inspect for proper vapor barrier installation, sealing and flashing
Inspect for damage to vapor barrier
Home Inspectors check for proper vapor barrier protection of the home’s frame
Inspect for proper window installation, sealing and flashing
Inspect for proper window function.
Inspection of exterior door installation for proper sealing and flashing.
Inspect for proper exterior door function.
Inspect for any missing roof components
Inspector for proper termination of exhaust pipes (both gas fired appliance and air vent removal.
Inspect for proper roof flashing installation.

Inspect for missing, improper installation of or damaged framing members including but not limited to: Wall Studs, sole plates, sill plates, top plates, headers, jack studs, king studs, wind bracing, blocking, fire blocking, fire stopping, ceiling joists, wood beams, engineered beams, I Joists, trusses, purlin braces, strong backs, rat runs, rafters, ridges collar ties, roof decking.
Thorough inspection of gas fired furnace pipe transition through the roof decking.
Inspect water supply pipe installation & protection.
Inspect sewer pipes above the foundation installation and protection.
Inspector will inspect electric branch and service wire installation and protection.
Inspect Heating Ventilation & Air Conditioning ductwork installation.
Inspect fireplace installation.
Test & inspect stair proper installation and damage.
Inspect Floor joist for proper installation and damage.

In addition to the standard inspection, Texas home inspection, which includes but is not limited to the following:

Foundation
Property grading around the home
Roof
Walls
Doors
Fireplace
Attic area
Windows
Electrical breaker box, outlet wiring and fixtures etc.
Plumbing faucets, drains water heater, water pipes, etc.
Heating Ventilation & Air Conditioning (HVAC)
Appliances
We also provide gas leak detection at appliance connections
Inspection of the lawn irrigation (if present)
Free thermal image home inspection of the home as well (great for finding missing insulation and water leaks).